TECHNISCHER BEREICH
Bei uns startet die Entwicklung beim Kunden, indem wir seine technischen und konstruktiven Anforderungen an das Material erfragen Wir entwickeln mit und für den Kunden das effizienteste Produkt um seinen Erfordernissen zu entsprechen
Unser Anspruch an die Fertigungstreue und pünktliche Lieferung zusammen mit einer dem Weltmarkt gerechten Qualität zu einem vernünftigen Preis, spiegelt sich in unserem Werk wieder. Die Fertigung sitzt im Distrikt Maharashtra in Indien und ist mit aktuellem Maschinenpark ausgestattet Wichtiges Augenmerk legen wir auf unser gut ausgebildetes und motiviertes Personal.
“Imagine the satisfaction that lies in turning
A MILLION DREAMS into reality.”
CONVERSTION CHART
HARDNESS CONVERSION CHART
| TABLE 2A Approximate Hardness Conversion Numbers for Nonaustenitic Steelsˆ | ||||||||
|---|---|---|---|---|---|---|---|---|
| (Rockwell C to other Hardness Numbers) | ||||||||
| Rockwell Superficial Hardness | ||||||||
| Rockwell C Scale, 150-kgf Load, Diamond Penetrator | Vickers Hardness Number | Brinell Hardness, 3000-kgf Load, 10-mm Ball | Knoop Hardness, 500-gf Load and Over | Rockwell A Scale, 60-kgf Load, Diamond Penetrator | 15N Scale, 15-kgf Load, Diamond Penetrator | 30N Scale 30-kgf Load, Diamond Penetrator | 45N Scale, 45-kgf Load, Diamond Penetrator | Approximate Tensile Strength, ksi (MPa) |
| 48 | 484 | 455 | 510 | 74.7 | 84.5 | 66.7 | 52.5 | 238 (1640) |
| 47 | 471 | 442 | 495 | 74.1 | 83.9 | 65.8 | 51.4 | 229 (1580) |
| 46 | 458 | 432 | 480 | 73.6 | 83.5 | 64.8 | 50.3 | 221 (1520) |
| 45 | 446 | 421 | 466 | 73.1 | 83.0 | 64.0 | 49.0 | 215 (1480) |
| 44 | 434 | 409 | 452 | 72.5 | 82.5 | 63.1 | 47.8 | 208 (1430) |
| 43 | 423 | 400 | 438 | 72.0 | 82.0 | 62.2 | 46.7 | 201 (1390) |
| 42 | 412 | 390 | 426 | 71.5 | 81.5 | 61.3 | 45.5 | 194 (1340) |
| 41 | 402 | 381 | 414 | 70.9 | 80.9 | 60.4 | 44.3 | 188 (1300) |
| 40 | 392 | 371 | 402 | 70.4 | 80.4 | 59.5 | 43.1 | 182 (1250) |
| 39 | 382 | 362 | 391 | 69.9 | 79.9 | 58.6 | 41.9 | 177 (1220) |
| 38 | 372 | 353 | 380 | 69.4 | 79.4 | 57.7 | 40.8 | 171 (1180) |
| 37 | 363 | 344 | 370 | 68.9 | 78.8 | 56.8 | 39.6 | 166 (1140) |
| 36 | 354 | 336 | 360 | 68.4 | 78.3 | 55.9 | 38.4 | 161 (1110) |
| 35 | 345 | 327 | 351 | 67.9 | 77.7 | 55.0 | 37.2 | 156 (1080) |
| 34 | 336 | 319 | 342 | 67.4 | 77.2 | 54.2 | 36.1 | 152 (1050) |
| 33 | 327 | 311 | 334 | 66.8 | 76.6 | 53.3 | 34.9 | 149 (1030) |
| 32 | 318 | 301 | 326 | 66.3 | 76.1 | 52.1 | 33.7 | 146 (1010) |
| 31 | 310 | 294 | 318 | 65.8 | 75.6 | 51.3 | 32.5 | 141 (970) |
| 30 | 302 | 286 | 311 | 65.3 | 75.0 | 50.4 | 31.3 | 138 (950) |
| 29 | 294 | 279 | 304 | 64.6 | 74.5 | 49.5 | 30.1 | 135 (930) |
| 28 | 286 | 271 | 297 | 64.3 | 73.9 | 48.6 | 28.9 | 131 (900) |
| 27 | 279 | 264 | 290 | 63.8 | 73.3 | 47.7 | 27.8 | 128 (880) |
| 26 | 272 | 258 | 284 | 63.3 | 72.8 | 46.8 | 26.7 | 125 (860) |
| 25 | 266 | 253 | 278 | 62.8 | 72.2 | 45.9 | 25.5 | 123 (850) |
| 24 | 260 | 247 | 272 | 62.4 | 71.6 | 45.0 | 24.3 | 119 (820) |
| 23 | 254 | 243 | 266 | 62.0 | 71.0 | 44.0 | 23.1 | 117 (810) |
| 22 | 248 | 237 | 261 | 61.5 | 70.5 | 43.2 | 22.0 | 115 (790) |
| 21 | 243 | 231 | 256 | 61.0 | 69.9 | 42.3 | 20.7 | 112 (770) |
| 20 | 238 | 226 | 251 | 60.5 | 69.4 | 41.5 | 19.6 | 110 (760) |
| TABLE 2B Approximate Hardness Conversion Numbers for Nonaustenitic Steels ˆ | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (Rockwell B to other Hardness Numbers) | |||||||||
| Rockwell Superficial Hardness | |||||||||
| Rockwell B Scale 100-kgf Load 1/16-in. (1.588-mm) Ball | Vickers Hardness Number | Brinell Hardness, 3000-kgf Load, 10-mm Ball | Knoop Hardness, 500-gf Load and Over | Rockwell A Scale,60-kgf Load, Diamond Penetrator | Rockwell F Scale, 60-kgf Load, 1/16-in. (1.588-mm) Ball | 15T Scale, 15-kgf Load, 1/16-in. (1.588-mm) Ball | 30T Scale, 30-kgf Load, 1/16-in. (1.588-mm) Ball | 45T Scale, 45-kgf Load, 1/16-in. (1.588-mm) Ball | Approximate Tensile Strength ksi (MPa) |
| 100 | 240 | 240 | 251 | 61.5 | … | 93.1 | 83.1 | 72.9 | 166 (800) |
| 99 | 234 | 234 | 246 | 60.9 | … | 92.8 | 82.5 | 71.9 | 114 (785) |
| 98 | 228 | 228 | 241 | 60.2 | … | 92.5 | 81.8 | 70.9 | 109 (750) |
| 97 | 222 | 222 | 236 | 59.5 | … | 92.1 | 81.1 | 69.9 | 104 (715) |
| 96 | 216 | 216 | 231 | 58.9 | … | 91.8 | 80.4 | 68.9 | 102 (705) |
| 95 | 210 | 210 | 226 | 58.3 | … | 91.5 | 79.8 | 67.9 | 100 (690) |
| 94 | 205 | 205 | 221 | 57.6 | … | 91.2 | 79.1 | 66.9 | 98 (675) |
| 93 | 200 | 200 | 216 | 57.0 | … | 90.8 | 78.4 | 65.9 | 94 (650) |
| 92 | 195 | 195 | 211 | 56.4 | … | 90.5 | 77.8 | 64.8 | 92 (635) |
| 91 | 190 | 190 | 206 | 55.8 | … | 90.2 | 77.1 | 63.8 | 90 (620) |
| 90 | 185 | 185 | 201 | 55.2 | … | 89.9 | 76.4 | 62.8 | 89 (615) |
| 89 | 180 | 180 | 196 | 54.6 | … | 89.5 | 75.8 | 61.8 | 88 (605) |
| 88 | 176 | 176 | 192 | 54.0 | … | 89.2 | 75.1 | 60.8 | 86 (590) |
| 87 | 172 | 172 | 188 | 53.4 | … | 88.9 | 74.4 | 59.8 | 84 (580) |
| 86 | 169 | 169 | 184 | 52.8 | … | 88.6 | 73.8 | 58.8 | 83 (570) |
| 85 | 165 | 165 | 180 | 52.3 | … | 88.2 | 73.1 | 57.8 | 82 (565) |
| 84 | 162 | 162 | 176 | 51.7 | … | 87.9 | 72.4 | 56.8 | 81 (560) |
| 83 | 159 | 159 | 173 | 51.1 | … | 87.6 | 71.8 | 55.8 | 80 (550) |
| 82 | 156 | 156 | 170 | 50.6 | … | 87.3 | 71.1 | 54.8 | 77 (530) |
| 81 | 153 | 153 | 167 | 50.0 | … | 86.9 | 70.4 | 53.8 | 73 (505) |
| 80 | 150 | 150 | 164 | 49.5 | … | 86.6 | 69.7 | 52.8 | 72 (495) |
| 79 | 147 | 147 | 161 | 48.9 | … | 86.3 | 69.1 | 51.8 | 70 (485) |
| 78 | 144 | 144 | 158 | 48.4 | … | 86.0 | 68.4 | 50.8 | 69 (475) |
| 77 | 141 | 141 | 155 | 47.9 | … | 85.6 | 67.7 | 49.8 | 68 (470) |
| 76 | 139 | 139 | 152 | 47.3 | … | 85.3 | 67.1 | 48.8 | 67 (460) |
| 75 | 137 | 137 | 150 | 46.8 | 99.6 | 85.0 | 66.4 | 47.8 | 66 (455) |
| 74 | 135 | 135 | 147 | 46.3 | 99.1 | 84.7 | 65.7 | 46.8 | 65 (450) |
| 73 | 132 | 132 | 145 | 45.8 | 98.5 | 84.3 | 65.1 | 45.8 | 64 (440) |
| 72 | 130 | 130 | 143 | 45.3 | 98.0 | 84.0 | 64.4 | 44.8 | 63 (435) |
| 71 | 127 | 127 | 141 | 44.8 | 97.4 | 83.7 | 63.7 | 43.8 | 62 (425) |
| 70 | 125 | 125 | 139 | 44.3 | 96.8 | 83.4 | 63.1 | 42.8 | 61 (420) |
| 69 | 123 | 123 | 137 | 43.8 | 96.2 | 83.0 | 62.4 | 41.8 | 60 (415) |
| 68 | 121 | 121 | 135 | 43.3 | 95.6 | 82.7 | 61.7 | 40.8 | 59 (405) |
| 67 | 119 | 119 | 133 | 42.8 | 95.1 | 82.4 | 61.0 | 39.8 | 58(400) |
OBERFLÄCHENRAUHEIT
| Ra (Mikrometer) | Ra (microinches) | RMS | CLA (N) | Rt | N | Schnittlänge | |
|---|---|---|---|---|---|---|---|
| zoll | mm | ||||||
| 0.025 | 1 | 1.1 | 1 | 0.3 | 1 | 0.003 | 0.08 |
| 0.05 | 2 | 2.2 | 2 | 0.5 | 2 | 0.01 | 0.25 |
| 0.1 | 4 | 4.4 | 4 | 0.8 | 3 | 0.01 | 0.25 |
| 0.2 | 8 | 8.8 | 8 | 1.2 | 4 | 0.01 | 0.25 |
| 0.4 | 16 | 17.6 | 16 | 2.0 | 5 | 0.01 | 0.25 |
| 0.8 | 32 | 32.5 | 32 | 4.0 | 6 | 0.03 | 0.8 |
| 1.6 | 63 | 64.3 | 63 | 8.0 | 7 | 0.03 | 0.8 |
| 3.2 | 125 | 137.5 | 125 | 13 | 8 | 0.1 | 2.5 |
| 6.3 | 250 | 275 | 250 | 25 | 9 | 0.1 | 2.5 |
| 12.5 | 500 | 550 | 500 | 50 | 10 | 0.1 | 2.5 |
| 25.0 | 1000 | 1100 | 1000 | 100 | 11 | 0.3 | 8.0 |
| 50.0 | 2000 | 2200 | 2000 | 200 | 12 | 0.3 | 8.0 |
| Ra = | Mittenrauwert in Mikrometern oder Mikrozoll. | ||||||
| RMS = | Root Mean Square in microinches | ||||||
| CLA = | Center Line Average in Microinches | ||||||
| Rt = | Roughness Ttal in microns | ||||||
| N = | New ISO (grade) scale numbers | ||||||
| Cut-off Length = | Length required for sample. | ||||||
ZOLL MM
| zoll | metrisch (mm) | zoll | metrisch (mm) |
|---|---|---|---|
| 1/4 | 6.35 | 3 | 76.2 |
| 5/16 | 7.94 | 3 1/8 | 79.37 |
| 3/8 | 9.53 | 3 1/4 | 82.55 |
| 7/16 | 11.11 | 3 3/8 | 85.72 |
| 1/2 | 12.7 | 3 1/2 | 88.9 |
| 9/16 | 14.29 | 3 5/8 | 92.07 |
| 5/8 | 15.88 | 3 3/4 | 95.25 |
| 11/16 | 17.46 | 3 7/8 | 98.42 |
| 3/4 | 19.05 | 4 | 101.6 |
| 13/16 | 20.64 | 4 1/8 | 104.77 |
| 7/8 | 22.23 | 4 1/4 | 107.95 |
| 15/16 | 23.81 | 4 3/8 | 111.12 |
| 1 | 25.4 | 4 1/2 | 114.3 |
| 1 1/8 | 28.57 | 4 5/8 | 117.47 |
| 1 1/4 | 31.75 | 4 3/4 | 120.65 |
| 1 3/8 | 34.93 | 4 7/8 | 123.82 |
| 1 1/2 | 38.1 | 5 | 127 |
| 1 5/8 | 41.28 | 5 1/8 | 130.17 |
| 1 3/4 | 44.45 | 5 1/4 | 133.52 |
| 1 7/8 | 47.63 | 5 3/8 | 136.8 |
| 2 | 50.8 | 5 1/2 | 139.7 |
| 2 1/8 | 53.97 | 5 5/8 | 142.87 |
| 2 1/4 | 57.15 | 5 3/4 | 146.05 |
| 2 3/8 | 60.32 | 5 7/8 | 149.22 |
| 2 1/2 | 63.5 | 6 | 152.4 |
| 2 5/8 | 66.67 | 6 1/8 | 155.57 |
| 2 3/4 | 69.85 | 6 1/4 | 158.75 |
| 2 7/8 | 73.02 | 6 3/8 | 161.92 |
FUSS IN MM
| Diámetro (mm) | h6 | h7 | h8 | h9 | h10 | h11 |
|---|---|---|---|---|---|---|
| 6 < 10 | -0.009/+0 | -0.015/+0 | -0.022/+0 | -0.036/+0 | -0.058/+0 | -0.090/+0 |
| 10 < 18 | -0.011/+0 | -0.018/+0 | -0.027/+0 | -0.043/+0 | -0.070/+0 | -0.110/+0 |
| 18 < 30 | -0.013/+0 | -0.021/+0 | -0.033/+0 | -0.052/+0 | -0.084/+0 | -0.130/+0 |
| 30 < 50 | -0.016/+0 | -0.025/+0 | -0.039/+0 | -0.062/+0 | -0.100/+0 | -0.160/+0 |
| 50 < 80 | -0.019/+0 | -0.030/+0 | -0.046/+0 | -0.072/+0 | -0.120/+0 | -0.190/+0 |
| 80 < 120 | -0.022/+0 | -0.035/+0 | -0.054/+0 | -0.087/+0 | -0.140/+0 | -0.220/+0 |
| 120 < 180 | -0.025/+0 | -0.040/+0 | -0.063/+0 | -0.100/+0 | -0.160/+0 | -0.250/+0 |
