ZONE TECHNIQUE
At, la recherche commence par les clients, en leur demandant de définir leurs besoins techniques d’ingénierie Nos produits sont développés selon le concept du coût minimal tout en améliorant la qualité des produits pour nos clients.
Nos locaux de production reflètent parfaitement notre passion pour la manufacture d’excellence, notre engagement sur la qualité de haut niveau et sur les délais de livraison. Nos usines situées à, District, en Inde, abritent les machines et équipement s utilisant les technologies les plus avancées Nous avons toute confiance dans nos équipes bien formées et hautement qualifiées.
“Imaginez la satisfaction que procure le de fait de convertir
A MILLION DE REVES en réalité.”
CONVERSTION CHART
HARDNESS CONVERSION CHART
| TABLEAU 2A Conversion approximative des valeurs de dureté pour aciers aéronautiques | ||||||||
|---|---|---|---|---|---|---|---|---|
| (Rockwell vers autre, valeurs) | ||||||||
| Rockwell Superficiel Dureté | ||||||||
| Rockwell C Echelle, 150-kgf, pénétrateur au diamant | Valeurs de dureté Vickers | Brinell Hardness, 3000-kgf Load, 10-mm Ball | Knoop Hardness, 500-gf Load et autres | Rockwell A Scale, 60-kgf Load, Diamond Penetrator | 15N Scale, 15-kgf Load, Diamond Penetrator | 30N Scale 30-kgf Load, Diamond Penetrator | 45N Scale, 45-kgf Load, Diamond Penetrator | résistance à l’arrachementksi (MPa) |
| 48 | 484 | 455 | 510 | 74.7 | 84.5 | 66.7 | 52.5 | 238 (1640) |
| 47 | 471 | 442 | 495 | 74.1 | 83.9 | 65.8 | 51.4 | 229 (1580) |
| 46 | 458 | 432 | 480 | 73.6 | 83.5 | 64.8 | 50.3 | 221 (1520) |
| 45 | 446 | 421 | 466 | 73.1 | 83.0 | 64.0 | 49.0 | 215 (1480) |
| 44 | 434 | 409 | 452 | 72.5 | 82.5 | 63.1 | 47.8 | 208 (1430) |
| 43 | 423 | 400 | 438 | 72.0 | 82.0 | 62.2 | 46.7 | 201 (1390) |
| 42 | 412 | 390 | 426 | 71.5 | 81.5 | 61.3 | 45.5 | 194 (1340) |
| 41 | 402 | 381 | 414 | 70.9 | 80.9 | 60.4 | 44.3 | 188 (1300) |
| 40 | 392 | 371 | 402 | 70.4 | 80.4 | 59.5 | 43.1 | 182 (1250) |
| 39 | 382 | 362 | 391 | 69.9 | 79.9 | 58.6 | 41.9 | 177 (1220) |
| 38 | 372 | 353 | 380 | 69.4 | 79.4 | 57.7 | 40.8 | 171 (1180) |
| 37 | 363 | 344 | 370 | 68.9 | 78.8 | 56.8 | 39.6 | 166 (1140) |
| 36 | 354 | 336 | 360 | 68.4 | 78.3 | 55.9 | 38.4 | 161 (1110) |
| 35 | 345 | 327 | 351 | 67.9 | 77.7 | 55.0 | 37.2 | 156 (1080) |
| 34 | 336 | 319 | 342 | 67.4 | 77.2 | 54.2 | 36.1 | 152 (1050) |
| 33 | 327 | 311 | 334 | 66.8 | 76.6 | 53.3 | 34.9 | 149 (1030) |
| 32 | 318 | 301 | 326 | 66.3 | 76.1 | 52.1 | 33.7 | 146 (1010) |
| 31 | 310 | 294 | 318 | 65.8 | 75.6 | 51.3 | 32.5 | 141 (970) |
| 30 | 302 | 286 | 311 | 65.3 | 75.0 | 50.4 | 31.3 | 138 (950) |
| 29 | 294 | 279 | 304 | 64.6 | 74.5 | 49.5 | 30.1 | 135 (930) |
| 28 | 286 | 271 | 297 | 64.3 | 73.9 | 48.6 | 28.9 | 131 (900) |
| 27 | 279 | 264 | 290 | 63.8 | 73.3 | 47.7 | 27.8 | 128 (880) |
| 26 | 272 | 258 | 284 | 63.3 | 72.8 | 46.8 | 26.7 | 125 (860) |
| 25 | 266 | 253 | 278 | 62.8 | 72.2 | 45.9 | 25.5 | 123 (850) |
| 24 | 260 | 247 | 272 | 62.4 | 71.6 | 45.0 | 24.3 | 119 (820) |
| 23 | 254 | 243 | 266 | 62.0 | 71.0 | 44.0 | 23.1 | 117 (810) |
| 22 | 248 | 237 | 261 | 61.5 | 70.5 | 43.2 | 22.0 | 115 (790) |
| 21 | 243 | 231 | 256 | 61.0 | 69.9 | 42.3 | 20.7 | 112 (770) |
| 20 | 238 | 226 | 251 | 60.5 | 69.4 | 41.5 | 19.6 | 110 (760) |
| TABLE 2B Approximate Hardness Conversion Numbers for Nonaustenitic Steels | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (Rockwell B to other Hardness Numbers) | |||||||||
| Rockwell Superficial Hardness | |||||||||
| Rockwell B Scale 100-kgf Load 1/16-in. (1.588-mm) Ball | Valeurs de dureté Vickers | Brinell Hardness, 3000-kgf Load, 10-mm Ball | Knoop Hardness, 500-gf Load et autres | Rockwell F Scale, 60-kgf Load, 1/16-in. (1.588-mm) Ball | Rockwell F Scale, 60-kgf Load, 1/16-in. (1.588-mm) Ball | 15T Scale, 15-kgf Load, 1/16-in. (1.588-mm) Ball | 30T Scale, 30-kgf Load, 1/16-in. (1.588-mm) Ball | 45T Scale, 45-kgf Load, 1/16-in. (1.588-mm) Ball | Approximate Tensile Strength ksi (MPa) |
| 100 | 240 | 240 | 251 | 61.5 | … | 93.1 | 83.1 | 72.9 | 166 (800) |
| 99 | 234 | 234 | 246 | 60.9 | … | 92.8 | 82.5 | 71.9 | 114 (785) |
| 98 | 228 | 228 | 241 | 60.2 | … | 92.5 | 81.8 | 70.9 | 109 (750) |
| 97 | 222 | 222 | 236 | 59.5 | … | 92.1 | 81.1 | 69.9 | 104 (715) |
| 96 | 216 | 216 | 231 | 58.9 | … | 91.8 | 80.4 | 68.9 | 102 (705) |
| 95 | 210 | 210 | 226 | 58.3 | … | 91.5 | 79.8 | 67.9 | 100 (690) |
| 94 | 205 | 205 | 221 | 57.6 | … | 91.2 | 79.1 | 66.9 | 98 (675) |
| 93 | 200 | 200 | 216 | 57.0 | … | 90.8 | 78.4 | 65.9 | 94 (650) |
| 92 | 195 | 195 | 211 | 56.4 | … | 90.5 | 77.8 | 64.8 | 92 (635) |
| 91 | 190 | 190 | 206 | 55.8 | … | 90.2 | 77.1 | 63.8 | 90 (620) |
| 90 | 185 | 185 | 201 | 55.2 | … | 89.9 | 76.4 | 62.8 | 89 (615) |
| 89 | 180 | 180 | 196 | 54.6 | … | 89.5 | 75.8 | 61.8 | 88 (605) |
| 88 | 176 | 176 | 192 | 54.0 | … | 89.2 | 75.1 | 60.8 | 86 (590) |
| 87 | 172 | 172 | 188 | 53.4 | … | 88.9 | 74.4 | 59.8 | 84 (580) |
| 86 | 169 | 169 | 184 | 52.8 | … | 88.6 | 73.8 | 58.8 | 83 (570) |
| 85 | 165 | 165 | 180 | 52.3 | … | 88.2 | 73.1 | 57.8 | 82 (565) |
| 84 | 162 | 162 | 176 | 51.7 | … | 87.9 | 72.4 | 56.8 | 81 (560) |
| 83 | 159 | 159 | 173 | 51.1 | … | 87.6 | 71.8 | 55.8 | 80 (550) |
| 82 | 156 | 156 | 170 | 50.6 | … | 87.3 | 71.1 | 54.8 | 77 (530) |
| 81 | 153 | 153 | 167 | 50.0 | … | 86.9 | 70.4 | 53.8 | 73 (505) |
| 80 | 150 | 150 | 164 | 49.5 | … | 86.6 | 69.7 | 52.8 | 72 (495) |
| 79 | 147 | 147 | 161 | 48.9 | … | 86.3 | 69.1 | 51.8 | 70 (485) |
| 78 | 144 | 144 | 158 | 48.4 | … | 86.0 | 68.4 | 50.8 | 69 (475) |
| 77 | 141 | 141 | 155 | 47.9 | … | 85.6 | 67.7 | 49.8 | 68 (470) |
| 76 | 139 | 139 | 152 | 47.3 | … | 85.3 | 67.1 | 48.8 | 67 (460) |
| 75 | 137 | 137 | 150 | 46.8 | 99.6 | 85.0 | 66.4 | 47.8 | 66 (455) |
| 74 | 135 | 135 | 147 | 46.3 | 99.1 | 84.7 | 65.7 | 46.8 | 65 (450) |
| 73 | 132 | 132 | 145 | 45.8 | 98.5 | 84.3 | 65.1 | 45.8 | 64 (440) |
| 72 | 130 | 130 | 143 | 45.3 | 98.0 | 84.0 | 64.4 | 44.8 | 63 (435) |
| 71 | 127 | 127 | 141 | 44.8 | 97.4 | 83.7 | 63.7 | 43.8 | 62 (425) |
| 70 | 125 | 125 | 139 | 44.3 | 96.8 | 83.4 | 63.1 | 42.8 | 61 (420) |
| 69 | 123 | 123 | 137 | 43.8 | 96.2 | 83.0 | 62.4 | 41.8 | 60 (415) |
| 68 | 121 | 121 | 135 | 43.3 | 95.6 | 82.7 | 61.7 | 40.8 | 59 (405) |
| 67 | 119 | 119 | 133 | 42.8 | 95.1 | 82.4 | 61.0 | 39.8 | 58(400) |
SURFACE ROUGHNESS
| Ra (micromètres) | Ra (micropouces) | RMS | CLA (N) | Rt | N | Cut-off Length | |
|---|---|---|---|---|---|---|---|
| inch | mm | ||||||
| 0.025 | 1 | 1.1 | 1 | 0.3 | 1 | 0.003 | 0.08 |
| 0.05 | 2 | 2.2 | 2 | 0.5 | 2 | 0.01 | 0.25 |
| 0.1 | 4 | 4.4 | 4 | 0.8 | 3 | 0.01 | 0.25 |
| 0.2 | 8 | 8.8 | 8 | 1.2 | 4 | 0.01 | 0.25 |
| 0.4 | 16 | 17.6 | 16 | 2.0 | 5 | 0.01 | 0.25 |
| 0.8 | 32 | 32.5 | 32 | 4.0 | 6 | 0.03 | 0.8 |
| 1.6 | 63 | 64.3 | 63 | 8.0 | 7 | 0.03 | 0.8 |
| 3.2 | 125 | 137.5 | 125 | 13 | 8 | 0.1 | 2.5 |
| 6.3 | 250 | 275 | 250 | 25 | 9 | 0.1 | 2.5 |
| 12.5 | 500 | 550 | 500 | 50 | 10 | 0.1 | 2.5 |
| 25.0 | 1000 | 1100 | 1000 | 100 | 11 | 0.3 | 8.0 |
| 50.0 | 2000 | 2200 | 2000 | 200 | 12 | 0.3 | 8.0 |
| Ra = | Roughness moyenne en micromètres or micropouces. | ||||||
| RMS = | Moyenne quadratiquein micropouces | ||||||
| CLA = | Center Line moyenne en micropouces | ||||||
| Rt = | rugosité totale en microns | ||||||
| N = | Nouveaux niveaux (ISO) valeurs d’échelle | ||||||
| Порезка = | Length required for sample. | ||||||
INCHES TO MM
| inch | Métrique(mm) | inch | Métrique(mm) |
|---|---|---|---|
| 1/4 | 6.35 | 3 | 76.2 |
| 5/16 | 7.94 | 3 1/8 | 79.37 |
| 3/8 | 9.53 | 3 1/4 | 82.55 |
| 7/16 | 11.11 | 3 3/8 | 85.72 |
| 1/2 | 12.7 | 3 1/2 | 88.9 |
| 9/16 | 14.29 | 3 5/8 | 92.07 |
| 5/8 | 15.88 | 3 3/4 | 95.25 |
| 11/16 | 17.46 | 3 7/8 | 98.42 |
| 3/4 | 19.05 | 4 | 101.6 |
| 13/16 | 20.64 | 4 1/8 | 104.77 |
| 7/8 | 22.23 | 4 1/4 | 107.95 |
| 15/16 | 23.81 | 4 3/8 | 111.12 |
| 1 | 25.4 | 4 1/2 | 114.3 |
| 1 1/8 | 28.57 | 4 5/8 | 117.47 |
| 1 1/4 | 31.75 | 4 3/4 | 120.65 |
| 1 3/8 | 34.93 | 4 7/8 | 123.82 |
| 1 1/2 | 38.1 | 5 | 127 |
| 1 5/8 | 41.28 | 5 1/8 | 130.17 |
| 1 3/4 | 44.45 | 5 1/4 | 133.52 |
| 1 7/8 | 47.63 | 5 3/8 | 136.8 |
| 2 | 50.8 | 5 1/2 | 139.7 |
| 2 1/8 | 53.97 | 5 5/8 | 142.87 |
| 2 1/4 | 57.15 | 5 3/4 | 146.05 |
| 2 3/8 | 60.32 | 5 7/8 | 149.22 |
| 2 1/2 | 63.5 | 6 | 152.4 |
| 2 5/8 | 66.67 | 6 1/8 | 155.57 |
| 2 3/4 | 69.85 | 6 1/4 | 158.75 |
| 2 7/8 | 73.02 | 6 3/8 | 161.92 |
FEET TO MM
| Feet (ft’) | Mètres (Mtr) | Feet (ft’) | Mètres (Mtr) |
|---|---|---|---|
| 1 | 0.3 | 21 | 6.4 |
| 2 | 0.61 | 22 | 6.71 |
| 3 | 0.91 | 23 | 7.01 |
| 4 | 1.22 | 24 | 7.32 |
| 5 | 1.52 | 25 | 7.62 |
| 6 | 1.83 | 26 | 7.92 |
| 7 | 2.13 | 27 | 8.23 |
| 8 | 2.44 | 28 | 8.53 |
| 9 | 2.74 | 29 | 8.84 |
| 10 | 3.05 | 30 | 9.14 |
| 11 | 3.35 | 31 | 9.45 |
| 12 | 3.66 | 32 | 9.75 |
| 13 | 3.96 | 33 | 10.06 |
| 14 | 4.27 | 34 | 10.36 |
| 15 | 4.57 | 35 | 10.67 |
| 16 | 4.88 | 36 | 10.97 |
| 17 | 5.18 | 37 | 11.28 |
| 18 | 5.49 | 38 | 11.58 |
| 19 | 5.79 | 39 | 11.89 |
| 20 | 6.1 | 40 | 12.19 |
